We Ion Water Machineries specialist in manufacturer, seller and supplier of water softening plant. High polystyrene based cation exchanger in sodium form adsorb Calcium, Magnesium in raw water and after producing certain amount of salt water these are exhausted. These then require regeneration with 5 to 10 % common salt solution. In case of big units, saturated salt solution is prepared in a R.C.C. tank and required amount of brine is drawn in a brine measuring tank. The brine solution is then diluted with the help of an injector and fed into the softener. In case of medium size softener salt solution is prepared in a salt pot and instantly fed into the softener. In case of small size softener , salt is dumped inside the shell. Excess brine is then drained during the period of rinsing with filtered water. Soft water is then tested with the help of a Hardness Test Kit and fed into different processes. A water meter is incorporated on the line for measuring total amount of soft water treated by the softening plant. In case raw water iron contains more than 0.3ppm as Fe, an iron removal plant must be installed before a softener. This is to avoid iron fouling of Ion Exchange Resin in softener. Capacity 50 to 50000 gallon per hour and above.