We Ion Water Machineries manufacturer and supplier of iron removing plant. The raw water is passed through an iron removal filter, the filter media is supported on gravel bed that consist of multi layers of graded quartz sand, fine sand and super fine black silica and pebbles. Which retain the suspended iron particles. During the filtration cycle the filter bed retains the dirt and suspended iron particles from the raw water and accumulates within the filter bed. As the filtration progress the filter media gets loaded the retained particles, this results in a continuous increase of pressure drop across the filter. When a predetermined pressure drop level is achieved the filter is shut down for cleaning. After back washing the filter is rinsed with water and after the quality of water is achieved the filter is put back into service. When water enters the iron removal filter it passes through a bubble of compressed air that adds oxygen to it. The water then passes through a filter bed. The filter material enhances a reaction that separates the iron for your water. The insoluble flakes of iron that result are then caught by the filter bed during the back washing. Capacity 50 to 50000 gallon per hour and above.