We Are Ion Water Machineries most trusted name and pioneer in the filed of water softening plant manufacturer and supplier in West Bengal since 1967. Water softening plant on based of sodium form. The high polystyrene base resin in sodium form adsorb Calcium, Magnesium in raw water and after producing certain amount of salt water these are exhausted. These then require regeneration with 5 to 10% common salt solution. In case of big units saturated salt solution is prepared in a dilution tank which is made by P.V.C. and required amount of brine is drawn in a brine measuring tank. The brine Solution is then diluted with the help of an Injector and fed into the softener. In case of medium and small size of softener salt solution is prepared in a salt pot and instantly fed into the softener or dumped inside the shell. Excess brine is then drained during the period of rinsing with filtered water Soft water is then tested with the help of a Hardness Test Kit. In case raw water iron contains is more than 0.3ppm as Fe, an iron removal must be installed before a softener. This is to avoid iron fouling of Ion Exchange Resin in water softening plant. Capacity 50 to 50000 gallon per hour and above.