We are Ion Water Machineries manufacturer and supplier of water softening plant for domestic and industrial uses. water softener is made by polystyrene based resins in sodium form adsorb Calcium, Magnesium in raw water and after producing certain amount of soft water these are exhausted. These then require regeneration with 5 to 10% common salt solution. In case of big unit of softener plant saturated salt solution is prepared in a salt dilution tank and required amount of brine is drawn in a brine measuring tank. The brine solution is then dilute with the help of an injector and fed into the softener plant. In case of medium size softener salt solution is prepared in a salt pot and instantly fed into the softener. In case of small size softener salt is dumped inside the shell. Excess brine is then drained during the period of rinsing with the help of filtered water. Soft water is then tested with the help of a Hardness Test Kit and fed into different processes. A meter is incorporated on the line for measuring total amount of soft water treated by the softening plant. In case raw water iron contains more than 0.3ppm as Fe, an iron removal must be installed before a softener. This is to avoid iron fouling of Ion Exchange Resin in softening plant. Capacity 50 to 50000 gallon per hour and above.