Ion Water Machineries one of the most trusted manufacturer and supplier of Water Softening Plant in West Bengal since 1967. A Water Softening Plant work through a process called ion exchange, which eliminates Calcium and Magnesium from the feed water. When the hard water enters into the mineral tank, it flows through a bed of spherical resin beads. These plastic resin beads usually made from high polystyrene , ae charged with a sodium ion. The resin beads are anions meaning they have a negative charge, the Calcium and Magnesium minerals have a positive charge, making them cations. Since opposite charge attract the negative charge of the minerals is attracted to the positive charge of the resin beads. As the hard water passes through the Water Softening Plant which is packed with high polystyrene based cation exchanger, the resin beads grab a hold of the mineral ions and remove them from the water, when the bead seizes the mineral ion the sodium ion is released. The colums of resin strips all the hardness out of the feed water as it passes through the mineral tank and soft water flows out into your area. In case raw water contains iron more than 0.3 ppm as Fe, an Iron Removal Filter must be installed before a Water softening Plant. This is to avoid iron fouling of ion exchange resin in Water Softening Plant. Water Softening Plant capacity 50 to 50000 gallon per hour and above.